How to Make a Balloon Arch at Home, Step by Step
How to make a balloon arch without a professional: what to buy, how to build the garland, how to hang it without damaging walls, and the mistakes to avoid.
By Birthday BasketPublished 5 min read

In this guide
Learning how to make a balloon arch takes one attempt. The technique is simple, the materials are inexpensive, and the garland style that is popular now is deliberately uneven, so small mistakes disappear into the design.
This guide covers the garland-on-a-strip method, which needs no frame and works on any wall. Allow about two hours for your first one, less with a helper.
What you need
- Latex balloons in three sizes. Small, medium and large in two or three colours. Mixed sizes are what make the arch look full.
- A balloon strip or strong string. A strip is a plastic tape with holes that grip the balloon knots. String or fishing line also works.
- A pump. A hand pump is fine; an electric pump saves a lot of time. Blowing up this many balloons by mouth is not realistic.
- Removable hooks or painter's tape to hold the arch to the wall.
- Glue dots or double-sided tape for filling gaps.
- Scissors.
A DIY party kit or decoration kit may include several of these. Ask what is in the pack before you buy the pieces separately.
For quantities, a rough planning figure is eight to ten balloons for every 30 cm of garland when you are mixing sizes. Our guide to how many balloons you need has a fuller table.
Step 1: plan the shape
Decide where the arch starts and ends, and mark both points lightly on the wall. A full arch runs up one side, across the top and down the other. A half-arch climbs one side and trails across the top, and uses about half the balloons.
Measure the path with a piece of string. That length is the length of garland you need to build.
Step 2: inflate in batches
Inflate the balloons to different sizes on purpose. Do not fill any of them to their limit; a slightly under-inflated balloon is rounder, looks better and is less likely to pop in warm weather.
Tie each one and sort them into piles by size. Inflating everything first, before you start assembling, makes the next step much quicker.
Step 3: make pairs and clusters
Tie two balloons of the same size together at the knots to make a pair. Twist two pairs around each other to make a cluster of four. Clusters are the building blocks of the arch.
Make more large and medium clusters than small ones. Keep the smallest balloons loose for filling gaps at the end.
Step 4: build the garland
If you are using a balloon strip, push each knot through a hole, alternating sides and sizes as you go. If you are using string, tie each cluster on with a simple knot and push it tight against the last.
Work on the floor. Rotate each cluster a little from the one before so the balloons nest together. Vary the colours as you go rather than making stripes, unless stripes are the plan.
Build the garland in two or three sections if it is long. Shorter sections are far easier to lift and position.
Step 5: hang it
Fix removable hooks at the start, the end and every 60 to 90 cm along the path. Tie the garland to each hook with string or a spare length of strip.
Hang the top section first, then let the sides fall. Step back after each fixing and look at the shape. It is much easier to adjust now than after the gaps are filled.
Test your hook or tape on a hidden patch of wall first. Fresh paint and some textured finishes do not hold adhesive well.
Step 6: fill the gaps
This is the step that turns an average arch into a good one. Use glue dots to stick the small loose balloons into every gap where you can see the strip or the wall. Add a few at odd angles to break up the outline.
Finish with any extras: a foil number, a few metallic balloons, or greenery tucked in at the base.

Common mistakes when you make a balloon arch
- All one size. The arch looks thin and regular. Always mix sizes.
- Overfilled balloons. They turn pear-shaped and pop when the room warms up.
- Too few fixing points. The garland sags and pulls away from the wall.
- Building it too early. Latex balloons look their best for the first several hours. Build on the day, as close to the party as you reasonably can.
- Direct sunlight. A window behind the arch will shorten its life. See how long balloons last.
How to make a balloon arch ahead of time
Air-filled latex balloons hold up for longer than helium-filled ones, so a garland arch can be built in the morning for an evening party without trouble, provided the room is cool and shaded. Building the night before is possible in an air-conditioned room, though the balloons will have lost a little of their shine by party time.
Now choose your colours
Once you know how to make a balloon arch, the design choices are the enjoyable part. Three shades of one colour gives a soft, modern look; two contrasting colours and a metallic is brighter. There are more options in our balloon decoration ideas guide.
Message Birthday Basket with your colours and the length of your arch, and ask what balloons are currently in the shop.
Cover photo by Melike B on Pexels.
This guide is part of our Balloon Decorations series. For the full picture, start with Balloon Decoration Ideas for Birthdays: 12 Setups from Simple to Showpiece.



